next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

Figure

Density of impervious cover across Europe in 2015 (left) and average annual change in soil sealing between 2006-2015 (right)

Figure Created 26 Nov 2021 Last modified 25 Feb 2022
1 min read
Topics:
The map shows the density of soil sealing in 2012, based on a 10 km² reference grid. Green and light orange colors show areas with no or very limited sealing, while red and dark red colors show highly to fully sealed grid cells (mainly urban areas).

European data

ZIP archive
4.42 MB
Map-package

Metadata

information.png Units:

Average sealing density (in percentage) per 10 km grid cells. 

information.png Rights:
EEA standard re-use policy: unless otherwise indicated, re-use of content on the EEA website for commercial or non-commercial purposes is permitted free of charge, provided that the source is acknowledged (https://www.eea.europa.eu/legal/copyright). Copyright holder: European Environment Agency (EEA).
information.png Owners:
European Environment Agency (EEA)
information.png Figure type:
Map

Additional information

The data is derived from aggregating the original Imperviousness 2015, 100 m status layer, copyright by the Geoland2 project consortium

Related content

Based on data

Data Landscape fragmentation Effective Mesh Density time-series: major and medium anthropogenic fragmenting elements (FGA2-S) The datasets below correspond to a new version of the Effective Mesh Density (seff) 2016 dataset with improved input data, for the years 2009, 2012 and 2015. This time-series uses the Copernicus Imperviousness and the TomTom TeleAtlas datasets as fragmenting geometries. The Effective Mesh Density (seff) is a measure of the degree to which movement between different parts of the landscape is interrupted by a Fragmentation Geometry (FG). FGs are defined as the presence of impervious surfaces and traffic infrastructure, including medium sized roads. The more FGs fragment the landscape, the higher the effective mesh density hence the higher the fragmentation. An important consequence of landscape fragmentation is the increased isolation of ecosystem patches that breaks the structural connections and decreases resilience and ability of habitats to provide various ecosystem services. Fragmentation also influences human communities, agriculture, recreation and overall quality of life. Monitoring how fragmentation decreases landscape quality and changes the visual perception of landscapes provides information for policy measures that aim at improving ecosystem condition and restoration as well as maintaining the attractiveness of landscapes for recreational activities. The geographic coverage of the datasets is EEA39.
Data Copernicus Land Monitoring Service - High Resolution Layers - Imperviousness The imperviousness products capture the percentage and change of soil sealing. Sealed/Impervious areas are characterized by the substitution of the original (semi-) natural land cover or water surface with an artificial, often impervious cover. These artificial surfaces are usually maintained over long periods of time. The imperviousness HRL captures the spatial distribution of artificially sealed areas, including the level of sealing of the soil per area unit. The level of sealed soil (imperviousness degree 1-100%) is produced using a semi-automated classification, based on calibrated NDVI. Imperviousness data is available for the reference years 2006, 2009, 2012, 2015, and 2018, and contains two types of products: 1. Status layers Imperviousness Density (IMD) The percentage of sealed area is mapped for each status layer for any of the 5 reference years (e.g. degree of Imperviousness 2012). The status layers are available in 10m spatial resolution (2018), 20m spatial resolution (2006-2015), and as aggregated 100m products. Impervious Built-up (IBU) This product shows built-up areas, the part of the sealed surfaces where buildings can be found. Built-up areas are a sub-group of the sealed areas. It refers to areas where above-ground building constructions can be found. In contrast to the Imperviousness characterized by a continuous range of imperviousness measurements, built-up in the HRL 2018 is a binary product, expressed as built-up or non-built-up areas. This product is new for the 2018 mapping campaign and is available in 10 meter resolution, as well as a 100 meter aggregated version called Share of Built-up (SBU) 2. Change layers Two types of change products are available for each of the 3-year periods between the 5 reference years (2006-2009, 2009-2012, 2012-2015, 2015-2018), and in addition, for the period 2006-2012 (that is in line with the 6-year period between two Corine Land Cover products): a) A simple layer mapping the percentage of sealing increase or decrease for those pixels that show real sealing change in the period covered. This product is available in 20m and 100m pixel size. b) A classified change product that maps the most relevant categories of sealing change (unchanged no sealing, new cover, loss of cover, unchanged sealed, increased sealing, decreased sealing). This product is available in 20m pixel size only.

Related figures

Used in publications

Permalinks

Geographic coverage

Temporal coverage

For references, please go to https://eea.europa.eu./data-and-maps/figures/density-of-impervious-cover-across or scan the QR code.

PDF generated on 23 Nov 2024, 02:48 AM

EEA Page URL QR

Topics

Topics:

Tags

Filed under:
Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login