next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

Policy Document

EEA greenhouse gas - data viewer

Policy Document
The EEA GHG viewer provides easy access and analysis of the data contained in the Annual European Union greenhouse gas inventory and inventory report. The EEA GHG data viewer can show emission trends for the main sectors and allows for comparisons of emissions between different countries and activities.

Related content

Related indicators

Indicator Specification
Archived
Overview of electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. Gross electricity generation at plant level is defined as the electricity measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants using the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind, hydro, biomass and waste, solar photovoltaics and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes, which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC, which is based on the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses. It does not include the electricity producer's own use or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households and services (including agriculture and other sectors).
Indicator Specification
Archived
Overview of electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. Gross electricity generation at plant level is defined as the electricity measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants using the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind. hydro. biomass and waste. solar photovoltaics and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes, which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC, which is based upon the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses. It does not include the electricity producer's own use or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households and services (including agriculture and other sectors).
Indicator Specification
Archived
Efficiency of conventional thermal electricity and heat production in Europe The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of transformation outputs from conventional thermal power stations (electricity and heat) to transformation inputs to conventional thermal power stations. It is expressed as a percentage.  The output from conventional thermal power stations consists of gross electricity generation, as well as any heat sold to third parties (combined heat and power plants) by conventional thermal public power stations (public or main activity), district heating, and autoproducer thermal power stations. Gross electricity generation is measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Public supply is defined as undertakings that generate electricity (and heat) for sale to third parties as their primary activity. They may be privately or publicly owned. Autoproducers are defined as undertakings that generate electricity, either wholly or partly for their own use, as an activity that supports their primary activity (e.g. industrial processes). Fuel inputs include solid fuels (coal, lignite and equivalents), oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Final energy consumption intensity   Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, and services and agriculture. Total final energy intensity is defined as total final energy consumption (consumption of transformed energy such as electricity, publicly supplied heat, refined oil products, coke, etc., and the direct use of primary fuels such as gas or renewables, e.g. solar heat or biomass) divided by gross domestic product (GDP) at constant 2005 prices. The GDP figures are taken at constant prices to avoid the impact of inflation, base year 2005. Household energy intensity is defined as household final energy consumption divided by population. Transport energy intensity is defined as transport final energy consumption divided by GDP at constant 2005 prices. Industry energy intensity is defined as industry final energy consumption divided by industry Gross Value Added at constant 2005 prices. This excludes final energy consumption and gross value added from construction.  Services energy intensity is defined as services final energy consumption divided by services Gross Value Added at constant 2005 prices. Value added of services is the sum of 3 value added : G_H_I : Wholesale and retail trade, repair of motor vehicles, motorcycles and personal and household goods; hotels and restaurants; transport, storage and communication, J_K - Financial intermediation; real estate, renting and business activities and L_TO_P - Public administration and defence, compulsory social security; education; health and social work; other community, social and personal service activities; private households with employed persons
Indicator Specification
Archived
Efficiency of conventional thermal electricity and heat production The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of transformation outputs from conventional thermal power stations ( electricity and heat) to transformation input to conventional thermal power stations (%).  The output from conventional thermal power stations consists of gross electricity generation and also of any heat sold to third parties (Combined heat and power plants) by conventional thermal public power stations (public or main activity), district heating, and autoproducer thermal power stations. The gross electricity generation is measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Public supply is defined as undertakings which generate electricity (and heat) for sale to third parties as their primary activity. They may be privately or publicly owned. Autoproducers are defined as undertakings which generate electricity wholly or partly for their use as an activity which supports their primary activity (e.g. industrial processes). Fuel inputs include solid fuels (i.e. coal, lignite and equivalents), oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Final energy consumption intensity   Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, and services and agriculture. Total final energy intensity is defined as total final energy consumption (consumption of transformed energy such as electricity, publicly supplied heat, refined oil products, coke, etc., and the direct use of primary fuels such as gas or renewables, e.g. solar heat or biomass) divided by gross domestic product (GDP) at constant 2005 prices. The GDP figures are taken at constant prices to avoid the impact of inflation, base year 2005. Household energy intensity is defined as household final energy consumption divided by population. Transport energy intensity is defined as transport final energy consumption divided by GDP at constant 2005 prices. Industry energy intensity is defined as industry final energy consumption divided by industry Gross Value Added at constant 2005 prices. This excludes final energy consumption and gross value added from construction.  Services energy intensity is defined as services final energy consumption divided by services Gross Value Added at constant 2005 prices. Value added of services is the sum of 3 value added : G_H_I : Wholesale and retail trade, repair of motor vehicles, motorcycles and personal and household goods; hotels and restaurants; transport, storage and communication, J_K - Financial intermediation; real estate, renting and business activities and L_TO_P - Public administration and defence, compulsory social security; education; health and social work; other community, social and personal service activities; private households with employed persons
Indicator Specification
Archived
Final electricity consumption by sector Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses, it does not include own use by electricity producers or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households, services (including agriculture and other sectors).

Permalinks

For references, please go to https://eea.europa.eu./policy-documents/eea-greenhouse-gas-data-viewer or scan the QR code.

PDF generated on 23 Nov 2024, 07:51 PM

EEA Page URL QR
Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login