next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

Policy Document

The EU climate and energy (CARE) Package

Policy Document
Topics:
The climate and energy package is a set of binding legislation which aims to ensure the European Union meets its ambitious climate and energy targets for 2020. These targets, known as the "20-20-20" targets, set three key objectives for 2020: A 20% reduction in EU greenhouse gas emissions from 1990 levels; Raising the share of EU energy consumption produced from renewable resources to 20%; A 20% improvement in the EU's energy efficiency.

Related content

Related indicators

Indicator Specification
Archived
Progress on energy efficiency in Europe The ODEX index measures progress in energy efficiency by major sector (industry, transport, households and services), as well as for all final consumers. For each sector, the index is calculated as a weighted average of sub-sectoral indices of progress in energy efficiency, observed over a given period. Sub-sectors refer to industrial or service sector branches or end-uses for households or transport modes. The sub-sectoral indices are calculated from variations of unit energy consumption indicators, measured in physical units (for instance tons of steel, tonne-km for transport of goods, kWh/appliance, m² for offices, etc.). ODEX provides a better 'proxy' of energy efficiency progress from a policy evaluation viewpoint than the more commonly used monetary indicators.
Indicator Specification
Archived
Overview of electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. Gross electricity generation at plant level is defined as the electricity measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants using the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind, hydro, biomass and waste, solar photovoltaics and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes, which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC, which is based on the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses. It does not include the electricity producer's own use or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households and services (including agriculture and other sectors).
Indicator Specification
Archived
Overview of electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. Gross electricity generation at plant level is defined as the electricity measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants using the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind. hydro. biomass and waste. solar photovoltaics and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes, which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC, which is based upon the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses. It does not include the electricity producer's own use or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households and services (including agriculture and other sectors).
Indicator Specification
Archived
Efficiency of conventional thermal electricity and heat production in Europe The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of transformation outputs from conventional thermal power stations (electricity and heat) to transformation inputs to conventional thermal power stations. It is expressed as a percentage.  The output from conventional thermal power stations consists of gross electricity generation, as well as any heat sold to third parties (combined heat and power plants) by conventional thermal public power stations (public or main activity), district heating, and autoproducer thermal power stations. Gross electricity generation is measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Public supply is defined as undertakings that generate electricity (and heat) for sale to third parties as their primary activity. They may be privately or publicly owned. Autoproducers are defined as undertakings that generate electricity, either wholly or partly for their own use, as an activity that supports their primary activity (e.g. industrial processes). Fuel inputs include solid fuels (coal, lignite and equivalents), oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Progress on energy efficiency in Europe The ODEX index (Figure 1) measures energy efficiency progress by the main sectors (industry, transport and households), as well as for the whole economy (all final consumers). For each sector, the index is calculated as a weighted average of sub-sectoral indices of energy efficiency progress; the sub-sectors are the industrial or service sector branches or end-uses for households or transport modes. The sub-sectoral indices are calculated from variations of unit energy consumption indicators, measured in physical units and selected so as to provide the best “proxy” of energy efficiency progress from a policy evaluation viewpoint. The fact that indices are used enables different units to be combined for a given sector, for instance, for households kWh per appliance, koe/m 2 , tep per dwelling etc. The weight used to get a weighted aggregate is the share of each sub-sector in the total energy consumption of the sub–sectors considered in the calculation.  A value of ODEX equal to 90 means a 10 % energy efficiency gain. The variation of the specific consumption of space heating per dwelling linked to building standards is modelled as the change brought about by the introduction of new dwellings with better insulation than the whole stock, since a base year (e.g. 1990), assuming that the unit consumption of new dwellings is equal to the theoretical value implied by thermal regulations (Figure 2). This effect is calculated as follows: ∆UCnew t = (UCnew t * nbrlpn t + ∆UCnew t-1 * (nbrlpr t – nbrlpn t )) / nbrlpr t with:  ∆UCnew t=0 = ∆UCnew t=1990 = UC t=1990 nbrlpr t : stock of dwellings at year t nbrlpn t : the volume of construction at year t   UC t : unit consumption per dwelling for space heating at year t
Indicator Specification
Archived
Efficiency of conventional thermal electricity and heat production The energy efficiency of conventional thermal electricity production (which includes both public plants and autoproducers) is defined as the ratio of transformation outputs from conventional thermal power stations ( electricity and heat) to transformation input to conventional thermal power stations (%).  The output from conventional thermal power stations consists of gross electricity generation and also of any heat sold to third parties (Combined heat and power plants) by conventional thermal public power stations (public or main activity), district heating, and autoproducer thermal power stations. The gross electricity generation is measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Public supply is defined as undertakings which generate electricity (and heat) for sale to third parties as their primary activity. They may be privately or publicly owned. Autoproducers are defined as undertakings which generate electricity wholly or partly for their use as an activity which supports their primary activity (e.g. industrial processes). Fuel inputs include solid fuels (i.e. coal, lignite and equivalents), oil and other liquid hydrocarbons, gas, thermal renewables (industrial and municipal waste, wood waste, biogas and geothermal energy) and other non-renewable waste.
Indicator Specification
Archived
Progress on energy efficiency in Europe The ODEX index (Fig.1) measures the energy efficiency progress by main sector (industry, transport, households) and for the whole economy (all final consumers). For each sector, the index is calculated as a weighted average of sub-sectoral indices of energy efficiency progress; sub-sectors being industrial or service sector branches or end-uses for households or transport modes. The sub-sectoral indices are calculated from variations of unit energy consumption indicators, measured in physical units and selected so as to provide the best “proxy” of energy efficiency progress, from a policy evaluation viewpoint. The fact that indices are used enables to combine different units for a given sector, for instance for households kWh/appliance, koe/m2, tep/dwelling… The weight used to get the weighted aggregate is the share of each sub- sector in the total energy consumption of the sub –sectors considered in the calculation.  A value of  ODEX equal to 90 means a 10% energy efficiency gain. The variation of the specific consumption of space heating per dwelling linked to building standards is modelled as the change brought about by the introduction of new dwellings with a better insulation than the whole stock since a base year (e.g. 1990), assuming that the unit consumption of new dwellings is equal to the theoretical value implied by thermal regulations (Fig.2). This effect is calculated as follow: ∆UCnew t = (UCnew t * nbrlpn t + ∆UCnew t-1 * (nbrlpr t – nbrlpn t )) / nbrlpr t with:  ∆UCnew t=0 = ∆UCnew t=1990 = UC t=1990 nbrlpr t : stock of dwellings at year t nbrlpn t : the volume of construction at year t   UC t : unit consumption per dwelling for space heating at year t  

Permalinks

Geographic coverage

For references, please go to https://eea.europa.eu./policy-documents/the-eu-climate-and-energy-package or scan the QR code.

PDF generated on 23 Nov 2024, 08:40 PM

EEA Page URL QR

Topics

Topics:

Tags

Filed under:
Filed under: energy, climate
Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login