next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

External Data Spec

NCEI Data and Products (NOAA)

External Data Spec Published 22 Aug 2012
1 min read
NOAA's former three data centers have merged into the National Centers for Environmental Information (NCEI). The demand for high-value environmental data and information has dramatically increased in recent years. To improve our ability to meet that demand, NOAA’s former three data centers—the  National Climatic Data Center , the  National Geophysical Data Center , and the  National Oceanographic Data Center , which includes the  National Coastal Data Development Center —have merged into the National Centers for Environmental Information (NCEI).
information.png Provider:
National Oceanic and Atmospheric Administration (NOAA)
information.png Dataset URL:
http://www.ngdc.noaa.gov/ngdcinfo/onlineaccess.html
information.png Dataset path:

Selectable environmental topics

Related content

Produced figures

Used in indicators

Indicator Specification Global and European temperatures This indicator shows observed and projected changes in annual average near-surface temperature globally and for Europe. Europe is defined here as the land area in the range 34° to 72° northern latitude and -25° to 45° eastern longitude. Temperature anomalies are presented relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this period, greenhouse gases from the industrial revolution are considered to have had a relatively small influence on the global climate compared with natural influences. Time series of global and European land temperatures in Figure 1 are provided both as annual values (top) and as decadal averages (bottom).
Indicator Specification
Archived
Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades — even centuries at some locations — and a dense network of stations across the globe, especially in Europe, provides regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. Global average annual temperature deviations (anomalies) are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have had a relatively small influence on the climate compared with natural influences. However, it should be noted that owing to earlier changes in the climate due to internal and forced natural variability, there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system that can have an impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity, and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example, to understand the risks that the current climate poses to human and natural systems, and to assess how these may be impacted by future climate change.
Indicator Specification
Archived
Atmospheric greenhouse gas concentrations This indicator shows the observed trends in greenhouse gas concentrations. Greenhouse gases differ in the way they affect the climate system. In order to sum the effects of the individual greenhouse gases and other forcing agents in the atmosphere, the so-called 'greenhouse gas equivalent concentration' has been defined. This is the concentration of CO 2 that would cause the same amount of radiative forcing as a mixture of CO 2 and other forcing agents (greenhouse gases and aerosols). The forcing is expressed here in CO 2- equivalent concentrations, rather than watts per square meter (W/m 2 ), because they are more easily understood by the general public. For a more detailed assessment of radiative forcing expressed in W/m 2 , the reader should refer to IPCC (2013). Global average annual concentrations are presented here. Although greenhouse gases are mainly emitted in the northern hemisphere, the use of global average values is considered justified because the atmospheric lifetime of most greenhouse gases is long compared with the timescales of global atmospheric mixing. This leads to a rather uniform mixture around the globe. The exceptions are ozone and aerosols. However, as described earlier, these gases are less relevant in the long term.
Indicator Specification
Archived
Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades — even centuries at some locations — and a dense network of stations across the globe, especially in Europe, provides regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. Global average annual temperature deviations (anomalies) are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have had a relatively small influence on the climate compared with natural influences. However, it should be noted that owing to earlier changes in the climate due to internal and forced natural variability, there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system that can have an impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity, and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example, to understand the risks that the current climate poses to human and natural systems, and to assess how these may be impacted by future climate change.
Indicator Specification
Archived
Atmospheric greenhouse gas concentrations This indicator shows the observed trends in greenhouse gas concentrations. Greenhouse gases differ in the way they affect the climate system. In order to sum the effects of the individual greenhouse gasses and other forcing agents in the atmosphere, the so-called 'greenhouse gas equivalent concentration' has been defined. This is the concentration of CO 2 that would cause the same amount of radiative forcing as a mixture of CO 2 and other forcing agents (greenhouse gases and aerosols). The forcing is expressed here in CO 2- equivalent concentrations, rather than watts per square meter (W/m 2 ), because they are more easily understood by the general public. For a more detailed assessment of radiative forcing expressed in W/m 2 , the reader is referred to IPCC (2013). Global average annual concentrations are presented here. Although greenhouse gases are mainly emitted in the northern hemisphere, the use of global average values is considered justified, because the atmospheric lifetime of most greenhouse gases is long compared with the timescales of global atmospheric mixing. This leads to a rather uniform mixture around the globe. The exceptions are ozone and aerosols. However, as described earlier, these gases are less relevant in the long term.
Indicator Specification Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades — even centuries at some locations — and a dense network of stations across the globe, especially in Europe, provides regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. Global average annual temperature deviations (anomalies) are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have had a relatively small influence on the climate compared with natural influences. However, it should be noted that owing to earlier changes in the climate due to internal and forced natural variability, there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system that can have an impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity, and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example, to understand the risks that current climate poses to human and natural systems and to assess how these may be impacted by future climate change.
Indicator Specification
Archived
Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades - even centuries at some locations - and a dense network of stations across the globe, especially in Europe, provides regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. Global average annual temperature deviations, ‘anomalies’, are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have a relatively small influence on the climate compared to natural influences. However, it should be noted that owing to earlier changes in the climate due to internal and forced natural variability, there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system that can have an impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity, and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example, to understand the risks that current climate poses to human and natural systems and to assess how these may be impacted by future climate change.
Indicator Specification Atmospheric greenhouse gas concentrations This indicator shows the observed trends in greenhouse gas concentrations. Greenhouse gases differ in the way they affect the climate system. In order to sum the effects of the individual greenhouse gasses and other forcing agents in the atmosphere, the so-called ‘greenhouse gas equivalent concentration’ has been defined. This is the concentration of CO 2 that would cause the same amount of radiative forcing as a mixture of CO 2 and other forcing agents (greenhouse gases and aerosols). The forcing is expressed here in CO 2- equivalent concentrations, rather than watts per square meter (W/m 2 ), because they are more easily understood by the general public. For a more detailed assessment of radiative forcing expressed in W/m 2 , the reader is referred to IPCC (2013). Global average annual concentrations are presented here. Although greenhouse gases are mainly emitted in the northern hemisphere, the use of global average values is considered justified, because the atmospheric lifetime of most greenhouse gases is long compared to the timescales of global atmospheric mixing. This leads to a rather uniform mixture around the globe. The exceptions are ozone and aerosols. However, as described earlier, these gases are less relevant, over the long term.
Indicator Specification
Archived
Global and European temperatures This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades or even centuries at some locations and a dense network of stations across the globe, and especially in Europe, provide regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. This indicator provides guidance for the following policy-relevant questions:  Will the global average temperature increase stay within the UNFCCC policy target of 2.0°C above pre-industrial levels?  Will the rate of global average temperature increase stay below the indicative proposed target of 0.2°C increase per decade? Temperature changes also influence other aspects of the climate system which can impact on human activities, such as sea level rise, intensity and frequency of floods and droughts, biota and crop productivity and vector-borne diseases. In consideration with the target of limiting the rise in global average temperature, understanding seasonal variations and spatial distributions of temperature change are important, for example to manage the risks that current climate poses to human and natural systems and to assess how these may be impacted by future climate change.
Indicator Specification
Archived
Atmospheric greenhouse gas concentrations This indicator shows the observed trends in greenhouse gas concentrations. The various greenhouse gases have been grouped in three different ways: (1) the six Kyoto Protocol GHGs (CO 2 , CH 4 , N 2 O, HFCs, PFCs & SF 6 ) (2) long-living GHGs (Kyoto Protocol gases plus the Montreal Protocol gases CFCs, HCFCs & CH 3 CCl 3 ) (3) long-living GHGs and ozone, water vapour and aerosols Greenhouse gasses are grouped in two ways. I n addition to the concentration of individual GHGs, they are grouped using the CO 2 -equivalent concentration as a way to add the different gasses. The CO 2 -equivalent concentration of a gas is the CO 2 concentration that would cause the same amount of radiative forcing as the mixture of all GHGs. Global annual averages are considered, because in general the gases mix quite well in the atmosphere. 
Indicator Specification
Archived
Atmospheric greenhouse gas concentrations The indicator shows the observed trends of greenhouse gas concentrations. The various greenhouse gases have been grouped in three different ways: (1) the six Kyoto Protocol GHGs (CO 2 , CH 4 , N 2 O, HFCs, PFCs & SF 6 ) (2) long-living GHGs (Kyoto Protocol gases plus the Montreal Protocol gases CFCs, HCFCs & CH 3 CCl 3 ) (3) long-living GHGs and ozone, water vapour and aerosols Next to the concentration of individual GHGs, greenhouse gasses are grouped in two ways, using the CO 2 -equivalent concentration as a way to add the different gasses. The CO 2 -equivalent concentration of a gas is the CO 2 concentration that would cause the same amount of radiative forcing as the mixture of all GHGs. Global annual averages are considered, because in general the gases mix quite well in the atmosphere. 
Indicator Specification
Archived
Atmospheric greenhouse gas concentrations The indicator shows the observed trends of greenhouse gas concentrations. The various greenhouse gases have been grouped in three different ways (see 'Justification for Indicator Selection’ section above). Next to the concentration of individual GHGs, greenhouse gasses are grouped in two ways, using the CO 2 -equivalent concentration as a way to add the different gasses. The CO 2 -equivalent concentration of a gas is the CO 2 concentration that would cause the same amount of radiative forcing as the mixture of all GHGs. Global annual averages are considered, because in general the gases mix quite well in the atmosphere. 
Indicator Specification
Archived
Atmospheric greenhouse gas concentrations The indicator shows the observed trends of greenhouse gas concentrations. The various greenhouse gases have been grouped in three different ways (see rationale). Except for the concentration of individual GHGs, the effect on the enhanced greenhouse effect is presented as CO 2 -equivalent concentrations, which is the CO 2 concentration that would cause the same amount of radiative forcing as the mixture of all GHGs. Global annual averages are considered, because in general the gases mix quite well in the atmosphere.
Indicator Specification
Archived
Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades or even centuries at some locations and a dense network of stations across the globe, and especially in Europe, provide regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. This indicator provides guidance for the following policy-relevant questions:  Will the global average temperature increase stay within the UNFCCC policy target of 2.0°C above pre-industrial levels?  Will the rate of global average temperature increase stay below the indicative proposed target of 0.2°C increase per decade? Global average annual temperature deviations, ‘anomalies’, are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (beginning of instrumental temperature records).  During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have a relatively small influence on climate compared to natural influences. However it should be noted that owing to earlier changes in the climate due to internal and forced natural variability there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system which can impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example to understand the risks that current climate poses to human and natural systems and to assess how these may be impacted by future climate change.

Permalinks

For references, please go to https://eea.europa.eu./data-and-maps/data/external/national-geophysical-data-center-ngdc or scan the QR code.

PDF generated on 22 Nov 2024, 11:59 PM

EEA Page URL QR

Topics

Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login