next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

Policy Document

Directive 2010/30/EU Directive 2010/30/EU of the European Parliament and of the Council of 19 May 2010 on the indication by labelling and standard product information of the consumption of energy and other resources by energy-related products

Policy Document
1 min read
This is an old version, kept for reference only.

 Go to latest version
Energy labeling directive

Related content

Related indicators

Indicator Specification
Archived
Progress on energy efficiency in Europe The ODEX index measures progress in energy efficiency by major sector (industry, transport, households and services), as well as for all final consumers. For each sector, the index is calculated as a weighted average of sub-sectoral indices of progress in energy efficiency, observed over a given period. Sub-sectors refer to industrial or service sector branches or end-uses for households or transport modes. The sub-sectoral indices are calculated from variations of unit energy consumption indicators, measured in physical units (for instance tons of steel, tonne-km for transport of goods, kWh/appliance, m² for offices, etc.). ODEX provides a better 'proxy' of energy efficiency progress from a policy evaluation viewpoint than the more commonly used monetary indicators.
Indicator Specification
Archived
Overview of electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. Gross electricity generation at plant level is defined as the electricity measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants using the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind, hydro, biomass and waste, solar photovoltaics and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes, which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC, which is based on the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses. It does not include the electricity producer's own use or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households and services (including agriculture and other sectors).
Indicator Specification
Archived
Overview of electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. Gross electricity generation at plant level is defined as the electricity measured at the outlet of the main transformers, i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants using the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind. hydro. biomass and waste. solar photovoltaics and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes, which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC, which is based upon the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses. It does not include the electricity producer's own use or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households and services (including agriculture and other sectors).
Indicator Specification
Archived
Final energy consumption intensity   Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, and services and agriculture. Total final energy intensity is defined as total final energy consumption (consumption of transformed energy such as electricity, publicly supplied heat, refined oil products, coke, etc., and the direct use of primary fuels such as gas or renewables, e.g. solar heat or biomass) divided by gross domestic product (GDP) at constant 2005 prices. The GDP figures are taken at constant prices to avoid the impact of inflation, base year 2005. Household energy intensity is defined as household final energy consumption divided by population. Transport energy intensity is defined as transport final energy consumption divided by GDP at constant 2005 prices. Industry energy intensity is defined as industry final energy consumption divided by industry Gross Value Added at constant 2005 prices. This excludes final energy consumption and gross value added from construction.  Services energy intensity is defined as services final energy consumption divided by services Gross Value Added at constant 2005 prices. Value added of services is the sum of 3 value added : G_H_I : Wholesale and retail trade, repair of motor vehicles, motorcycles and personal and household goods; hotels and restaurants; transport, storage and communication, J_K - Financial intermediation; real estate, renting and business activities and L_TO_P - Public administration and defence, compulsory social security; education; health and social work; other community, social and personal service activities; private households with employed persons
Indicator Specification
Archived
Progress on energy efficiency in Europe The ODEX index (Figure 1) measures energy efficiency progress by the main sectors (industry, transport and households), as well as for the whole economy (all final consumers). For each sector, the index is calculated as a weighted average of sub-sectoral indices of energy efficiency progress; the sub-sectors are the industrial or service sector branches or end-uses for households or transport modes. The sub-sectoral indices are calculated from variations of unit energy consumption indicators, measured in physical units and selected so as to provide the best “proxy” of energy efficiency progress from a policy evaluation viewpoint. The fact that indices are used enables different units to be combined for a given sector, for instance, for households kWh per appliance, koe/m 2 , tep per dwelling etc. The weight used to get a weighted aggregate is the share of each sub-sector in the total energy consumption of the sub–sectors considered in the calculation.  A value of ODEX equal to 90 means a 10 % energy efficiency gain. The variation of the specific consumption of space heating per dwelling linked to building standards is modelled as the change brought about by the introduction of new dwellings with better insulation than the whole stock, since a base year (e.g. 1990), assuming that the unit consumption of new dwellings is equal to the theoretical value implied by thermal regulations (Figure 2). This effect is calculated as follows: ∆UCnew t = (UCnew t * nbrlpn t + ∆UCnew t-1 * (nbrlpr t – nbrlpn t )) / nbrlpr t with:  ∆UCnew t=0 = ∆UCnew t=1990 = UC t=1990 nbrlpr t : stock of dwellings at year t nbrlpn t : the volume of construction at year t   UC t : unit consumption per dwelling for space heating at year t
Indicator Specification
Archived
Progress on energy efficiency in Europe The ODEX index (Fig.1) measures the energy efficiency progress by main sector (industry, transport, households) and for the whole economy (all final consumers). For each sector, the index is calculated as a weighted average of sub-sectoral indices of energy efficiency progress; sub-sectors being industrial or service sector branches or end-uses for households or transport modes. The sub-sectoral indices are calculated from variations of unit energy consumption indicators, measured in physical units and selected so as to provide the best “proxy” of energy efficiency progress, from a policy evaluation viewpoint. The fact that indices are used enables to combine different units for a given sector, for instance for households kWh/appliance, koe/m2, tep/dwelling… The weight used to get the weighted aggregate is the share of each sub- sector in the total energy consumption of the sub –sectors considered in the calculation.  A value of  ODEX equal to 90 means a 10% energy efficiency gain. The variation of the specific consumption of space heating per dwelling linked to building standards is modelled as the change brought about by the introduction of new dwellings with a better insulation than the whole stock since a base year (e.g. 1990), assuming that the unit consumption of new dwellings is equal to the theoretical value implied by thermal regulations (Fig.2). This effect is calculated as follow: ∆UCnew t = (UCnew t * nbrlpn t + ∆UCnew t-1 * (nbrlpr t – nbrlpn t )) / nbrlpr t with:  ∆UCnew t=0 = ∆UCnew t=1990 = UC t=1990 nbrlpr t : stock of dwellings at year t nbrlpn t : the volume of construction at year t   UC t : unit consumption per dwelling for space heating at year t  
Indicator Specification
Archived
Overview of the electricity production and use in Europe Total gross electricity generation covers gross electricity generation in all types of power plants. The gross electricity generation at the plant level is defined as the electricity measured at the outlet of the main transformers. i.e. the consumption of electricity in the plant auxiliaries and in transformers is included. Electricity production by fuel is the gross electricity generation from plants utilising the following fuels: coal and lignite, oil, nuclear, natural and derived gas, renewables (wind. hydro. biomass and waste. solar PV and geothermal) and other fuels. The latter include electricity produced from power plants not accounted for elsewhere such as those fuelled by certain types of industrial wastes which are not classed as renewable. Other fuels also include the electricity produced as a result of pumping in hydro power stations. The share of each fuel in electricity production is taken as the ratio of electricity production from the relevant category against total gross electricity generation. It should be noted that the share of renewable electricity in this indicator, based on production, is not directly comparable with the share required under Directive 2001/77/EC which is based upon the share of renewables in electricity consumption. The difference between both shares is accounted for by the net balance between imports and exports of electricity and by how much domestic electricity generation is increased or reduced as a result. Final electricity consumption covers electricity supplied to the final consumer's door for all energy uses, it does not include own use by electricity producers or transmission and distribution losses. It is calculated as the sum of final electricity consumption from all sectors. These are disaggregated to cover industry, transport, households, services (including agriculture and other sectors).
Indicator Specification
Archived
Final energy consumption intensity   Final energy consumption covers energy supplied to the final consumer for all energy uses. It is calculated as the sum of final energy consumption of all sectors. These are disaggregated to cover industry, transport, households, and services and agriculture. Total final energy intensity is defined as total final energy consumption (consumption of transformed energy such as electricity, publicly supplied heat, refined oil products, coke, etc., and the direct use of primary fuels such as gas or renewables, e.g. solar heat or biomass) divided by gross domestic product (GDP) at constant 2005 prices. The GDP figures are taken at constant prices to avoid the impact of inflation, base year 2005. Household energy intensity is defined as household final energy consumption divided by population. Transport energy intensity is defined as transport final energy consumption divided by GDP at constant 2005 prices. Industry energy intensity is defined as industry final energy consumption divided by industry Gross Value Added at constant 2005 prices. This excludes final energy consumption and gross value added from construction.  Services energy intensity is defined as services final energy consumption divided by services Gross Value Added at constant 2005 prices. Value added of services is the sum of 3 value added : G_H_I : Wholesale and retail trade, repair of motor vehicles, motorcycles and personal and household goods; hotels and restaurants; transport, storage and communication, J_K - Financial intermediation; real estate, renting and business activities and L_TO_P - Public administration and defence, compulsory social security; education; health and social work; other community, social and personal service activities; private households with employed persons
Indicator Specification
Archived
Electricity consumption, energy efficiency and ownership of household appliances This indicator presents  trends in consumption of electricity in households, and in the efficiency and stock of three key appliances in the EU-28. The use of electricity in households for different types of end uses is shown in figure 1, while figure 2 shows energy consumption, average specific energy consumption (efficiency) and total stock of key household appliances, and trends in total electricity consumption for all appliances in the EU28. 

Permalinks

Geographic coverage

For references, please go to https://eea.europa.eu./policy-documents/directive-2010-30-eu or scan the QR code.

PDF generated on 23 Nov 2024, 07:27 PM

EEA Page URL QR

Topics

Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login