next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

External Data Spec

Annual Global (Land and Ocean) temperature anomalies

External Data Spec Published 07 May 2012
1 min read
National centres for environmental information (NCEI) https://www.ncei.noaa.gov/:Annual Global (Land and Ocean) temperature anomalies  (degrees C)    
information.png Provider:
National Oceanic and Atmospheric Administration (NOAA)
information.png Dataset URL:
ftp://ftp.ncdc.noaa.gov/pub/data/anomalies/usingGHCNMv2/
information.png Dataset path:

Select: annual.land_ocean.90S.90N.df_1901-2000mean.dat

 

 

information.png Other comments:

http://www.ncdc.noaa.gov/oa/ncdc.html

Related content

Interactive charts

Produced figures

Figure Global average near surface temperature since the pre-industrial period Global average near surface temperature since the pre-industrial period
Figure
Archived
Global average air temperature anomalies (1850 to 2013) in degrees Celsius (°C) relative to a pre-industrial baseline period Global average air temperature anomalies (1850 to 2013) in degrees Celsius (°C) relative to a pre-industrial baseline period for 3 analyses of observations: 1) Black line - HadCRUT4 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Morice et al. 2012) with the grey area representing the 95% confidence range, 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010). Upper graph shows annual anomalies and lower graph shows decadal average anomalies for the same datasets.
Figure
Archived
Rate of change of global average temperature, 1850–2013 (in ºC per decade) Rates of change of global average temperature (1850 to 2013) in ºC per decade, based on 10-year running average of the 3 datasets: 1) Black line - HadCRUT4 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Morice et al. 2012), 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010).
Figure
Archived
European average air temperature anomalies (1850 to 2013) in °C over land areas only The sources of the original data: 1) Black line - HadCRUT4 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Morice et al. 2012) with the grey area representing the 95% confidence range, 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010). Upper graph shows anomalies and lower graph shows decadal average anomalies for the same datasets. Europe is defined as the area between 35° to 70° North and -25° to 30° East, plus Turkey (35° to 40° North and 30° to 45° East).
Figure European average air temperature anomalies (1850 to 2012) in °C over land areas only, for annual (upper), winter (middle) and summer (lower) periods European average air temperature anomalies (1850 to 2012) in °C over land areas only, for annual (upper), winter (middle) and summer (lower) periods relative to pre-industrial baseline period. 1) Black line - HadCRUT4 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Morice et al. 2012) with the grey area representing the 95% confidence range, 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010).
Figure Rate of change of global average temperature, 1850–2012 (in ºC per decade) Rates of change of global average temperature (1850 to 2012) in ºC per decade, based on 10-year running average of the 3 datasets: 1) Black line - HadCRUT4 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Morice et al. 2012), 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010).
Figure Global average air temperature anomalies (1850 to 2012) in degrees Celsius (°C) relative to a pre-industrial baseline period Global average air temperature anomalies (1850 to 2012) in degrees Celsius (°C) relative to a pre-industrial baseline period for 3 analyses of observations: 1) Black line - HadCRUT4 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Morice et al. 2012) with the grey area representing the 95% confidence range, 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010). Upper graph shows annual anomalies and lower graph shows decadal average anomalies for the same datasets.
Figure Change in global average temperature from three sources (1850–2011) Left figure: Global average air temperature anomalies (1850 to 2011) in degrees Celsius (°C) relative to a pre-industrial baseline period for 3 analyses of observations: 1) Black line - HadCRUT3 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Brohan et al., 2006) with the grey area representing the 95% confidence range, 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010). Upper graph shows annual anomalies and lower graph shows decadal average anomalies for the same datasets. Right figure: Rates of change of global average temperature (1850 to 2011) in ºC per decade, based on 10-year running average of the 3 datasets: 1) Black line - HadCRUT3 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Brohan et al., 2006), 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010).
Figure
Archived
European average air temperature anomalies (1850 to 2011) in °C over land areas only, for annual (upper), winter (middle) and summer (lower) periods European average air temperature anomalies (1850 to 2011) in °C over land areas only, for annual (upper), winter (middle) and summer (lower) periods relative to pre-industrial baseline period. 1) Black line - HadCRUT3 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Brohan et al., 2006) with the grey area representing the 95% confidence range, 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010).
Figure
Archived
European average air temperature anomalies (1850 to 2011) in °C over land areas only The sources of the original data: 1) Black line - HadCRUT3 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Brohan et al., 2006) with the grey area representing the 95% confidence range, 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010). Upper graph shows anomalies and lower graph shows decadal average anomalies for the same datasets. Europe is defined as the area between 35° to 70° North and -25° to 30° East, plus Turkey (35° to 40° North and 30° to 45° East).
Figure
Archived
Rate of change of global average temperature, 1850-2011 (in ºC per decade) Rates of change of global average temperature (1850 to 2011) in ºC per decade, based on 10-year running average of the 3 datasets: 1) Black line - HadCRUT3 from the UK Met Office Hadley Centre and University of East Anglia Climate Research Unit, baseline period 1850-1899 (Brohan et al., 2006), 2) Red line – MLOST from the US National Oceanic and Atmospheric Administration (NOAA) National Climatic Data Centre, baseline period 1880-1899 (Smith et al., 2008), and 3) Blue line - GISSTemp from the National Aeronautics and Space Administration (NASA) Goddard Institute for Space Studies, baseline period 1880-1899 (Hansen et al., 2010).

Used in indicators

Indicator Specification Global and European temperatures This indicator shows observed and projected changes in annual average near-surface temperature globally and for Europe. Europe is defined here as the land area in the range 34° to 72° northern latitude and -25° to 45° eastern longitude. Temperature anomalies are presented relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this period, greenhouse gases from the industrial revolution are considered to have had a relatively small influence on the global climate compared with natural influences. Time series of global and European land temperatures in Figure 1 are provided both as annual values (top) and as decadal averages (bottom).
Indicator Specification
Archived
Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades — even centuries at some locations — and a dense network of stations across the globe, especially in Europe, provides regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. Global average annual temperature deviations (anomalies) are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have had a relatively small influence on the climate compared with natural influences. However, it should be noted that owing to earlier changes in the climate due to internal and forced natural variability, there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system that can have an impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity, and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example, to understand the risks that the current climate poses to human and natural systems, and to assess how these may be impacted by future climate change.
Indicator Specification
Archived
Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades — even centuries at some locations — and a dense network of stations across the globe, especially in Europe, provides regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. Global average annual temperature deviations (anomalies) are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have had a relatively small influence on the climate compared with natural influences. However, it should be noted that owing to earlier changes in the climate due to internal and forced natural variability, there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system that can have an impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity, and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example, to understand the risks that the current climate poses to human and natural systems, and to assess how these may be impacted by future climate change.
Indicator Specification Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades — even centuries at some locations — and a dense network of stations across the globe, especially in Europe, provides regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. Global average annual temperature deviations (anomalies) are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have had a relatively small influence on the climate compared with natural influences. However, it should be noted that owing to earlier changes in the climate due to internal and forced natural variability, there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system that can have an impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity, and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example, to understand the risks that current climate poses to human and natural systems and to assess how these may be impacted by future climate change.
Indicator Specification
Archived
Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades - even centuries at some locations - and a dense network of stations across the globe, especially in Europe, provides regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. Global average annual temperature deviations, ‘anomalies’, are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (the beginning of instrumental temperature records). During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have a relatively small influence on the climate compared to natural influences. However, it should be noted that owing to earlier changes in the climate due to internal and forced natural variability, there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system that can have an impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity, and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example, to understand the risks that current climate poses to human and natural systems and to assess how these may be impacted by future climate change.
Indicator Specification
Archived
Global and European temperatures This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades or even centuries at some locations and a dense network of stations across the globe, and especially in Europe, provide regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. This indicator provides guidance for the following policy-relevant questions:  Will the global average temperature increase stay within the UNFCCC policy target of 2.0°C above pre-industrial levels?  Will the rate of global average temperature increase stay below the indicative proposed target of 0.2°C increase per decade? Temperature changes also influence other aspects of the climate system which can impact on human activities, such as sea level rise, intensity and frequency of floods and droughts, biota and crop productivity and vector-borne diseases. In consideration with the target of limiting the rise in global average temperature, understanding seasonal variations and spatial distributions of temperature change are important, for example to manage the risks that current climate poses to human and natural systems and to assess how these may be impacted by future climate change.
Indicator Specification
Archived
Global and European temperature This indicator shows absolute changes and rates of change in average near-surface temperature for the globe and for a region covering Europe. Near-surface air temperature gives one of the clearest and most consistent signals of global and regional climate change, especially in recent decades. It has been measured for many decades or even centuries at some locations and a dense network of stations across the globe, and especially in Europe, provide regular monitoring of temperature, using standardised measurements, quality control and homogeneity procedures. This indicator provides guidance for the following policy-relevant questions:  Will the global average temperature increase stay within the UNFCCC policy target of 2.0°C above pre-industrial levels?  Will the rate of global average temperature increase stay below the indicative proposed target of 0.2°C increase per decade? Global average annual temperature deviations, ‘anomalies’, are discussed relative to a ‘pre-industrial’ period between 1850 and 1899 (beginning of instrumental temperature records).  During this time, anthropogenic greenhouse gases from the industrial revolution (between 1750 and 1850) are considered to have a relatively small influence on climate compared to natural influences. However it should be noted that owing to earlier changes in the climate due to internal and forced natural variability there was not one single pre-industrial climate and it is not clear that there is a rigorous scientific definition of the term ‘pre-industrial climate’. Temperature changes also influence other aspects of the climate system which can impact on human activities, including sea level, intensity and frequency of floods and droughts, biota and food productivity and infectious diseases. In addition to the global average target, seasonal variations and spatial distributions of temperature change are important, for example to understand the risks that current climate poses to human and natural systems and to assess how these may be impacted by future climate change.

Permalinks

For references, please go to https://eea.europa.eu./data-and-maps/data/external/noaa-ncdc-mlost or scan the QR code.

PDF generated on 22 Nov 2024, 07:59 PM

EEA Page URL QR

Topics

Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login