All official European Union website addresses are in the europa.eu domain.
See all EU institutions and bodiesDo something for our planet, print this page only if needed. Even a small action can make an enormous difference when millions of people do it!
Briefing
The European Union (EU), as a party to the UNFCCC, reports annually its GHG inventory for the years 1990 to X-2. The legal basis for the compilation of the EU GHG inventory is the Monitoring Mechanism Regulation (MMR) [1]. The annual GHG inventory is the official data source for the GHG emissions of the EU. Its final submission to the UNFCCC takes place at the end of May.
Total GHG emissions reported in the EU GHG inventory submission to the UNFCCC include all anthropogenic emissions and removals of all GHGs not controlled by the Montreal Protocol, within the EU geographical area. The EU GHG inventory is based on the aggregation of the EU Member States’ own inventories, which are also reported under the MMR and the UNFCCC. EU and national GHG emissions are estimated according to detailed reporting guidelines from the UNFCCC and the International Panel on Climate Change (IPCC), and are also subject to annual reviews by international experts, who follow internationally agreed review guidelines.
The compilation of the EU GHG inventory involves Member States, the EC Directorate-General for Climate Action (DG CLIMA), Eurostat, the Joint Research Centre, the EEA and its European Topic Centre on Climate Change Mitigation.
The approximated EU GHG inventory is an early estimate of EU GHG emissions for the year preceding the current year[2], and is available around September each year. It is based on the proxy GHG emission estimates reported by Member States under the MMR by 31 July every year. The EEA assists the EC in the compilation of the EU’s approximated GHG inventory. When Member States are not able to provide their own proxy emission estimates, the EEA complements the EU’s approximated GHG inventory with its own estimates. These proxy emissions are relevant for timely progress-to-target analysis.
The proxy GHG estimates cover total GHG emissions for all gases, sectors and Member States. They do not include emissions or removals from the land use, land-use change and forestry (LULUCF) sector.
Member States are responsible for the methodological choice regarding their own estimates. In order to gap-fill missing estimates, the EEA uses the latest activity data available at country level. When no appropriate data set exists, emissions are extrapolated from past trends, or kept constant if historic data do not show a clear trend. In such cases, the emission factors and the methodologies used for the most recent official inventory submissions to the UNFCCC are used. The EEA proxy estimates are used both for gap-filling purposes and for verifying the estimates provided by Member States.
The EU emissions trading system (EU ETS) was established under Directive 2003/87/EC (the EU ETS Directive). Across all Member States of the European Union plus Iceland, Norway and Liechtenstein, the EU ETS covers CO2 emissions from approximately 10 000 power stations and industrial plants; nitrous oxide (N2O) emissions from the production of nitric, adipic and glyoxylic acids; and emissions of perfluorocarbons (PFCs) from aluminium production. The ETS also covers emissions from flights within the European Economic Area.
Installations and aircraft operators covered by the EU ETS monitor their emissions during the calendar year according to an approved monitoring plan. The annual emission data are verified by an accredited verifier and submitted to the relevant authorities in each country by 31 March of the following year. Operators must also surrender a number of allowances equivalent to their verified emissions by 30 April of that year, as part of the annual ‘compliance cycle’ of the EU ETS.
The main database on the ETS at EU level is the Union Registry, which serves to guarantee accurate accounting for all allowances issued under the EU ETS. The European Union Transaction Log (EUTL) automatically checks, records, and authorises all transactions that take place between accounts in the Union Registry. The EEA publishes the information from the EUTL on verified emissions, allowances and surrendered units in the EU ETS in aggregated form by country, by sector and by year. Data on the annual verified emissions from installations are available in early April each year for the previous year[3].
Eurostat, the statistical office of the European Union, produces early CO2 emission estimates from fossil fuel combustion using cumulated monthly energy statistics reported by Member States under the EU Energy Statistics Regulation (Regulation (EU) 1099/2008). Early CO2 estimates are released four to five months after the end of the reference year[4].
Eurostat uses the same method and data source for all Member States. For each Member State, it calculates the percentage growth rate in the consumption of solid, gaseous and liquid fossil fuels for the last two years. These percentage changes are then applied to the CO2 emissions from fossil fuel combustion, as reported by Member States in their most recent GHG inventory, using the IPCC’s “reference approach”. The EU’s total early CO2 estimate from fossil fuel combustion corresponds to the sum of early CO2 emission estimates for each Member State.
Air emission accounts (AEAs) record the flows of gaseous and particulate materials (i.e. six GHGs including CO2, and seven air pollutants) emitted into the atmosphere. Member States calculate AEAs and report annual data to Eurostat 21 months after the reference year, according to Regulation (EU) No 691/2011 (Annex I).
AEAs are conceptually embedded in the international statistical standards of the System of Environmental-Economic Accounting (SEEA CF 2012). They offer a detailed breakdown of emissions by emitting industries and by households, as defined and classified in national accounts, and follow the national accounts residence principle. This implies that emissions by resident economic units are included even if these occur outside the territory (for example, shipping companies operating in the rest of the world). AEAs are, therefore, particularly suitable for integrated environmental-economic analysis and modelling, and they also reconcile emission totals that appear in the accounts with national inventory totals by reporting on so-called 'bridging items'.
Eurostat also publishes estimates of GHG and air pollutant emissions from the final use of products. These are also referred to as footprints and are estimated using environmental-economic modelling. They capture all emissions that occur throughout the full production chain of a product that arrives in the EU for final consumption or investment, irrespective of the industry or country where the emissions occurred. As such, they offer a complementary consumption perspective compared with GHG inventories and AEAs, which record emissions from a production perspective. These estimates use a method that requires various modelling assumptions, resulting in higher margins of error. For example, it is assumed that the imported products are produced with technologies similar to those employed within the EU. The emissions embodied in imports represent the amount of emissions avoided by the EU through importing the products from elsewhere instead of producing them in the EU.
The quarterly greenhouse gas estimates build on the annual air emissions accounts (AEA), which are compiled according to Regulation (EU) No. 691/2011 and conceptually embedded in the international System of Environmental-Economic Accounting (SEEA).
Quarterly greenhouse gas emission accounts are estimated for quarters and published 4-5 months after the end of a quarter (e.g. data for quarter Q2 2021 was published in November 2021).
The basic methodological principle for the quarterly estimates is to temporally disaggregate the annual AEA time series into quarterly values and to extrapolate for those quarters for which annual AEA are not yet available. Both steps are performed with auxiliary information from sub-annual ‘predictor’ variables to approximate the quarterly behaviour of greenhouse gas emissions. These ‘predictor’ variables include monthly energy statistics, short-term production volume indices, and quarterly national accounts.
The EC’s Joint Research Centre (JRC)[5], in collaboration with the Netherlands Environmental Assessment Agency, produces preliminary emission estimates on an annual basis, which cover the whole world. The estimates are based on the latest energy consumption data published by the International Energy Agency and, for fast-track time series, are complemented with additional data from British Petroleum and the National Bureau of Statistics of China. In addition to the energy data, non-combustion emissions are included, such as production data for cement, lime, ammonia, steel, agricultural liming from the U.S. Geological Survey and more. The historic time series by country are aggregated in the EDGAR database.
EDGAR also contains GHG, air pollutant, particulate matter and mercury emissions per country on a 0.1 x 0.1 degree grid for all anthropogenic sources, covering the 1970-2018 period. Although the database distinguishes between about 5 000 source activities, emissions are provided using the source categories defined by the IPCC.
What? |
Who? |
When? |
Time-liness |
Geographical |
Sectoral |
EU reporting |
---|---|---|---|---|---|---|
EU GHG inventory to UNFCCC |
EEA |
15 April (draft submission) and end May (final submission) |
X-2 |
EU and its 27 Member States (UNFCCC Convention) and EU-27 plus UK plus Iceland (Kyoto Protocol) |
All gases and sectors (100 % of emissions) |
EU MMR (525/2013) |
Proxy GHG inventory |
EEA |
30 September |
X-1 |
EU and its 27 Member States, plus other EEA member countries, if reported |
All gases and sectors (100 % of emissions) |
EU MMR (525/2013) |
EU ETS |
DG CLIMA |
Early April and May |
X-1 |
EU-27, Iceland, Norway and Liechtenstein |
~ 10 000 heavy energy-using installations, plus aircraft operators (~45 % of total emissions) |
EU ETS Directive (2003/87/EC) |
Early CO2 estimates |
Eurostat |
April/May |
X-1 |
EU and its 27 Member States |
CO2 from fossil fuel combustion (~80 % of total emissions) |
Eurostat work programme |
Air emission accounts and air emission intensities |
Eurostat |
December/ |
X-2 |
EU and its 27 Member States, UK, EFTA and EU candidate countries |
All gases and economic sectors (100 % of emissions) |
Regulation (EU) 691/2011 (Annex I) |
Emissions induced by final use (footprints) |
Eurostat |
March/April |
X-3 |
EU |
All gases and economic sectors (100 % of emissions) |
Eurostat work programme |
Quarterly GHG emission estimates |
Eurostat |
November, and every quarter thereafter |
Quarter Q-2 |
EU |
Total GHGs by main economic sector (100% of emissions) |
Eurostat’s work programme |
EDGAR global database |
JRC |
August/ September |
X-1 |
Global coverage |
All gases and sectors (100 % of emissions) |
JRC work programme |
[1] Regulation (EU) 525/2013 of the European Parliament and of the Council on a mechanism for monitoring and reporting greenhouse gas emissions
[2] If the current year is 2021, the approximated inventory refers to the year 2020.
[3] If the current year is 2021, the ETS data cover up to 2020.
[4] For example, the early estimate from Eurostat for 2020 is available by May 2021.
[5] In addtion to being the organisation responsibile for the agriculture and LULUCF sectors within the EU’s GHG inventory system under the UNFCCC, the JRC is also responsible for the quality assurance and quality control of the LULUCF data reported under EU Regulation 525/2013.
For references, please go to https://eea.europa.eu./publications/complementary-emission-estimates-produced-by/emission-estimates-produced-by-eu or scan the QR code.
PDF generated on 23 Dec 2024, 10:46 AM
Engineered by: EEA Web Team
Software updated on 26 September 2023 08:13 from version 23.8.18
Software version: EEA Plone KGS 23.9.14
Document Actions
Share with others