next
previous
items
European Union flag
Home
Topics
Analysis and data
Countries
Newsroom
About us

Policy Document

EU 2020 Biodiversity Strategy

Policy Document
in the Communication: Our life insurance, our natural capital: an EU biodiversity strategy to 2020 (COM(2011) 244) the European Commission has adopted a new strategy to halt the loss of biodiversity and ecosystem services in the EU by 2020. There are six main targets, and 20 actions to help Europe reach its goal. The six targets cover: - Full implementation of EU nature legislation to protect biodiversity - Better protection for ecosystems, and more use of green infrastructure - More sustainable agriculture and forestry - Better management of fish stocks - Tighter controls on invasive alien species - A bigger EU contribution to averting global biodiversity loss

Related content

Related indicators

Indicator Specification Abundance and distribution of selected species in Europe This indicator shows trends in the abundance of common birds and butterflies across their European ranges  over time . It is a composite of many species trend indices. A value of 100 is set for each species in the start year. If a species is added to the composite index after the start year, it is scaled to the index value of the year it was added to the indicator.  
Indicator Specification Conservation status of species under the EU Habitats Directive The indicator illustrates the conservation status and trends of 1 389 species of Community interest listed in the Habitats Directive at EU and Member State level. Conservation status is shown as good, poor, bad or unknown. It is based on data collected under the reporting obligations of Article 17 of the EU Habitats Directive (Council Directive 92/43/EEC).
Indicator Specification Conservation status of habitats under the EU Habitats Directive The indicator illustrates the conservation status and trends of 233 habitats of European interest listed in the Habitats Directive at EU and Member State level. Conservation status is shown as good, poor, bad and unknown. It is based on data collected under the reporting obligations of Article 17 of the EU Habitats Directive (92/43/EEC).
Indicator Specification Drought impact on ecosystems in Europe The indicator addresses anomalies and long term trends of vegetation productivity derived from remote sensing observed time series of vegetation indices in areas that are pressured by drought. Drought pressure is computed as the combination of significant Pearson correlation coefficients (r) derived between time series anomalies of yearly vegetation productivity and the anomalies of various drought hazards (dH) during the growing season. Drought impact is indicated as the most sever negative productivity anomaly under drought pressured areas as well as long term decreasing linear trends of annual vegetation productivity for areas that are pressured by drought hazards. Detailed indicators’ specifications are presented under Methodology.
Indicator Specification Natura 2000 sites designated under the EU Habitats and Birds Directives This indicator shows the current status of implementation of the Habitats Directive (92/43/EEC) and the Birds Directive (79/409/EEC) by EU Member States. It does this by showing trends in spatial coverage of special protection areas (SPAs) designated under the Birds Directive, sites and proposed sites of Community importance (SCIs) and special areas of conservation (SACs) designated under the Habitats Directive, as well as the net area of the Natura 2000 network.   The net percentage of Natura 2000 areas helps to evaluate progress in reaching Aichi Target 11.
Indicator Specification Ecological footprint of European countries The ecological footprint of Europe is a proxy measure of the amount of biologically productive land and water areas that Europe requires to produce all the biological resources it consumes and to absorb the emissions it generates, using prevailing technology and management strategies. These areas could be located anywhere in the world. This can be compared with the biocapacity of the planet or the biocapacity available within a given region.
Indicator Specification Vegetation productivity The indicator addresses trends in land surface productivity derived from remote sensing observed time series of vegetation indices. The vegetation index used in the indicator is the Plant Phenology Index (PPI, Jin and Eklundh, 2014). PPI is based on the MODIS Nadir BRDF-Adjusted Reflectance product (MODIS MCD43 NBAR. The product provides reflectance data for the MODIS “land” bands (1 - 7) adjusted using a bi-directional reflectance distribution function. This function models values as if they were collected from a nadir-view to remove so called cross-track illumination effects. The Plant Phenology Index (PPI) is a new vegetation index optimized for efficient monitoring of vegetation phenology. It is derived from radiative transfer solution using reflectance in visible-red (RED) and near-infrared (NIR) spectral domains. PPI is defined to have a linear relationship to the canopy green leaf area index (LAI) and its temporal pattern is strongly similar to the temporal pattern of gross primary productivity (GPP) estimated by flux towers at ground reference stations. PPI is less affected by presence of snow compared to commonly used vegetation indices such as Normalized Difference Vegetation Index (NDVI) or Enhanced Vegetation Index (EVI). The product is distributed with 500 m pixel size (MODIS Sinusoidal Grid) with 8-days compositing period.  References: Jönsson P., Eklundh L., 2004. TIMESAT—a program for analyzing time-series of satellite sensor data. Computers & Geosciences 30 (2004) 833–845. Eklundh L., Jönsson P., 2015. TIMESAT: A Software Package for Time-Series Processing and Assessment of Vegetation Dynamics. In: Kuenzer C., Dech S., Wagner W. (eds) Remote Sensing Time Series. Remote Sensing and Digital Image Processing, vol 22. Springer, Cham Jin, H., Eklundh, L. 2014. A physically based vegetation index for improved monitoring of plant phenology, Remote Sensing of Environment, 152, 512 – 525. Karkauskaite, P., Tagesson, T., Fensholt, R., 2017. Evaluation of the Plant Phenology Index (PPI), NDVI and EVI for Start-of-Season Trend Analysis of the Northern Hemisphere Boreal Zone, Remote Sensing, 9 (485), 21 pp. Jin, H.X.; Jönsson, A.M.; Bolmgren, K.; Langvall, O.; Eklundh, L., 2017. Disentangling remotely-sensed plant phenology and snow seasonality at northern Europe using MODIS and the plant phenology index. Remote Sensing of Environment 2017,198, 203-212. Abdi, A. M., N. Boke-Olén, H. Jin, L. Eklundh, T. Tagesson, V. Lehsten and J. Ardö (2019). First assessment of the plant phenology index (PPI) for estimating gross primary productivity in African semi-arid ecosystems. International Journal of Applied Earth Observation and Geoinformation 78: 249-260. Jin, H., A. M. Jönsson, C. Olsson, J. Lindström, P. Jönsson and L. Eklundh (2019). New satellite-based estimates show significant trends in spring phenology and complex sensitivities to temperature and precipitation at northern European latitudes. International Journal of Biometeorology 63(6): 763-775.
Indicator Specification Public awareness of biodiversity in Europe This indicator is based on the Eurobarometer survey on biodiversity, a quantitative questionnaire-based survey, which also captures qualitative information, involving focus groups.
Indicator Specification Landscape fragmentation pressure and trends in Europe This indicator measures landscape fragmentation due to transport infrastructure and sealed areas. Unlike the previous indicator on fragmentation status, this updated version uses the TeleAtlas® Multinet data set to ensure the statistical comparability of the time series. While the Open Street Map data set is a valuable source of the street network available for the general public, there are still inconsistencies in this data set for some regions of Europe, which render it secondary to the TeleAtlas data set. As in the previous version, this indicator is based on the effective mesh size method  (Jaeger, 2000) . For some species, the effective mesh size (meff) can be interpreted as the area that is accessible when beginning to move from a randomly chosen point inside a landscape without encountering anthropogenic barriers such as transport routes or built-up areas. However, it should be stressed that for many species that can fly, or are effective dispersers in others ways, man-made structures may not act as barriers.  The combination of all barriers in a landscape is referred to as the fragmentation geometry (FG) hereafter. The meff value expresses the probability that any two points chosen randomly in an area are connected. Hence, meff is a measure of landscape connectivity, i.e. the degree to which movements between different parts of the landscape are possible. The larger the meff, the more connected the landscape. The indicator addresses the structural connectivity of the landscape and does not tackle functional, species-specific connectivity. The effective mesh density (seff) is a measure of landscape fragmentation, i.e. the degree to which movement between different parts of the landscape is interrupted by fragmentation geometry. It gives the effective number of meshes (or landscape patches) per 1 000 km 2 , in other words the density of the meshes. The seff value is 1 000 km 2 /meff, hence the number of meshes per 1 000 km 2 . The more barriers fragmenting the landscape, the higher the effective mesh density. The values of meff and seff are reported within the cells of a 1 km 2 regular grid. The value of meff is area-proportionally additive, hence it characterises the fragmentation of any region considered, independently of its size, and thus can be calculated for a combination of two or more regions. It has several advantages over other metrics: It addresses the entire landscape matrix instead of addressing individual patches. It is independent of the size of the reporting unit and its values can be compared among reporting units of differing sizes. It is suitable for comparing the fragmentation of regions with differing total areas and with differing proportions occupied by housing, industry and transportation structures. Its reliability has been confirmed on the basis of suitability criteria through a systematic comparison with other quantitative measures. The suitability of other metrics is limited, as they only partially meet the following criteria: intuitive interpretation; mathematical simplicity; modest data requirements; low sensitivity to small patches; detection of structural differences; mathematical homogeneity (i.e. intensive or extensive).
Indicator Specification
Archived
Pathways of introduction of marine non-indigenous species to European seas This indicator describes the processes (pathways) that result in the transfer of alien species from one location to another. The identification and categorisation of pathways follows the Convention on Biological Diversity (CBD) classification as interpreted by the IUCN (2017). A hierarchical approach has been adopted to describe the pathways, based on the framework developed by Hulme et al. (2008). The main pathways shown above, in which a NIS arrive, can be subdivided into the following categories: importation of a commodity; arrival of a transport vector; or spread from a neighbouring region. The principal pathways were identified under the CBD process (UNEP, 2014) as quoted below. Pathways: 'Transport–Stowaway' refers to the moving of live organisms attached to shipping - transporting vessels and associated equipment and media. This pathway is further subdivided (in Figure 2 and Figure 3) into  three sub-groups. The physical means of transport-stowaway include various conveyances, ballast water and sediments (short: T-S/BALLAST WATER), bio-fouling of ships, boats, offshore oil and gas platforms and other water vessels (short: T-S/HULL FOULING), dredging, angling or fishing equipment (short: T-S/OTHER). Recreational boating is also included under this pathway. 'Release in nature' refers to the intentional introduction of live alien organisms for the purpose of human use in the natural environment. Examples include for biological control; erosion control (and dune stabilisation); fishing or hunting in the wild; landscape 'improvement'; and the introduction of threatened organisms for conservation purposes. 'Escape from confinement’; refers to the movement of (potentially) invasive alien species from confinement (e.g. aquaria; aquaculture and mariculture facilities; scientific research or breeding programmes). Through this pathway, the organisms were initially purposefully imported or otherwise transported to the confined conditions, but then escaped from such confinement, unintentionally. This may include the accidental or irresponsible release of live organisms from confinement, including cases such as the disposal of live food into the environment or the use of live baits in an unconfined water system. 'Transport–Contaminant' refers to the unintentional movement of live organisms as contaminants of a commodity that is intentionally transferred through international trade, development assistance, or emergency relief. This includes pests and fisheries as well as contaminants of other products. ‘Corridor’ refers to the movement of alien organisms into a new region following the construction of transport infrastructures, in whose absence the spread would not have been possible. Such trans-bio-geographical corridors include international canals (connecting river catchments and seas). The secondary natural dispersal of invasive alien species that have been introduced by various  pathways is unaided. Information on the mechanisms of the secondary spread of invasive alien species, after their introduction is not considered in this analysis. Trends in primary pathways over 6 year periods should tell a story when combined with management policies applied/implemented over the last decades. In reality, there could be other factors involved, for example: the decrease could be partly explained by the decreasing pool of potential NIS species not yet arrived in Europe; another factor could be variations in sampling effort, available expertise; the decrease may also be a temporal phenomenon etc.. These aspects are no yet considered in this analysis.
Indicator Specification Trends in marine non-indigenous species This indicator shows the cumulative number and trends in the introduction and recording of marine NIS in the regional seas of Europe since 1949.
Indicator Specification Oxygen concentrations in European coastal and marine waters The indicator illustrates the geographical distribution and trends in summer/autumn concentrations of oxygen in the near-bottom waters of the regional seas of Europe. It uses oxygen concentrations in the near-bottom layer during the period July-October. The following marine regions and subregions are covered, in line with the Marine Strategy Framework Directive (MSFD) (sub)regions: Baltic Sea, North-East Atlantic Ocean, Mediterranean Sea and Black Sea (see 'Regional seas surrounding Europe' map: Regional Seas ).
Indicator Specification
Archived
Abundance and distribution of selected European species This indicator shows trends in the abundance of common birds and butterflies across their European ranges over time . It is a composite of many species trend indices. A value of 100 is set for each species in the start year. If a species is added to the composite index after the start year, it is scaled to the index value of the year it was added to the indicator.  
Indicator Specification
Archived
Ecological footprint of European countries The ecological footprint of Europe is a proxy measure of the amount of biologically productive land and water areas that Europe requires to produce all the biological resources it consumes and to absorb the waste it generates, using prevailing technology and management strategies. These areas could be located anywhere in the world. This can be compared with the biocapacity of the planet or the biocapacity available within a given region. Both biocapacity and the ecological footprint are measured in global hectares (gha).
Indicator Specification Changes in fish distribution in European seas This indicator looks at the temporal development of the ratio between the number of Lusitanian and Boreal fish species within ICES Statistical rectangles and ICES divisions.
Indicator Specification
Archived
Agriculture: nitrogen balance The indicator estimates the potential surplus (or deficit) of nitrogen in agricultural land. It calculates the balance between nitrogen added to an agricultural system and nitrogen removed from the system annually in kilograms of nitrogen per hectare of utilised agricultural area. The input side of the balance counts mineral fertiliser application and manure excretion as well as atmospheric deposition, biological fixation and biosolids (compost, sludge and sewage) input. The output side of the balance represents the removal from grassland (grazing and mowing) and the net crop uptake (removal) from arable land. The gross nitrogen balance takes an 'extended soil' surface (or 'land' surface) as the system boundary, meaning that it also includes nitrogen losses from animal housing and manure management (e.g. storage) systems.   The data used are partly based on expert estimates of various physical parameters for the individual countries as a whole. There may also be large regional variations within a country so national figures should be interpreted with care.  To assess the trend in the development of the nitrogen balance, it is necessary to draw on average values over several years, as factors such as extreme weather conditions may influence the annual nitrogen surplus. In this case, 2000-2003, and 2011-2014 were taken as reference periods.
Indicator Specification Ecosystem coverage Proportional and absolute change in extent and turnover of land cover categories aggregated to relate to MAES ecosystem types in Europe from 2006 to 2012. MAES ecosystem types are: (1) urban; (2) cropland; (3) grassland; (4) woodland and forest; (5) heathland and shrub; (6) sparsely vegetated land; (7) inland wetlands; (8) rivers and lakes; (9) marine inlets and transitional waters; and (10) marine. This indicator is based on photo-interpretation of satellite imagery and gives a 'wall-to-wall' picture of the changes and dynamics in Europe with respect to ecosystems. Additional indicators can be used to further highlight trends in extent and state of each of the ecosystem types mentioned above using computations from other data sources.
Indicator Specification
Archived
Abundance and distribution of selected species This indicator shows trends in the abundance of common birds and butterflies across their European ranges over time . It is a composite of many species trend indices. A value of 100 is set for each species in the start year. If a species is added to the composite index after the start year, it is scaled to the index value at the year it was added to the indicator.  
Indicator Specification
Archived
Sites designated under the EU Habitats and Birds Directives This indicator shows the current status of implementation of the Habitats (92/43/EEC) and the Birds Directives (79/409/EEC) by EU Member States. It does this by showing trends in spatial coverage of designated Special Protection Areas (SPAs), proposed Sites of Community Importance (SCIs) and Special Areas of Conservation (SACs), as well as the net area of the Natura 2000 network.   The net percentage of protected areas helps to evaluate progress towards Aichi Target 11.
Indicator Specification Landscape fragmentation pressure from urban and transport infrastructure expansion This indicator is based on the Effective Mesh Size (Jaeger 2000) method .  For some species, the effective mesh size (meff) can be interpreted as the area that is accessible when beginning to move from a randomly chosen point inside a landscape without encountering man-made barriers such as transport routes or built-up areas. However, it should be stressed that for many species that can fly, or are effective dispersers in others ways, man-made structures may not act as barriers. The combination of all barriers in a landscape is called Fragmentation Geometry (FG) hereafter. The meff value expresses the probability that any two points chosen randomly in an area are connected. Hence, meff is a measure of landscape connectivity, i.e. the degree to which movements between different parts of the landscape are possible. The larger the meff, the more connected the landscape. The indicator addresses structural connectivity of the landscape and does not tackle functional, species specific connectivity. The Effective Mesh Density (seff) is a measure of landscape fragmentation, i.e. the degree to which movement between different parts of the landscape is interrupted by Fragmentation Geometry. It gives the effective number of meshes (or landscape patches) per 1 000 km 2 , in other words, the density of the meshes. The seff value is calculated as 1 000 km 2 /meff, hence, the number of meshes per 1 000 km 2 . The more barriers fragmenting the landscape, the higher the effective mesh density. meff and seff are reported within the cells of a 1 km 2 regular grid. meff is area-proportionally additive, hence it characterises the fragmentation of any region considered, independently of its size, and thus can be calculated for a combination of two or more regions. The meff has several advantages over other metrics: It addresses the entire landscape matrix instead of addressing individual patches. It is independent of the size of the reporting unit and its values can be compared among reporting units of differing sizes. It is suitable for comparing the fragmentation of regions with differing total areas and with differing proportions occupied by housing, industry and transportation structures. It's reliability has been confirmed on the basis of suitability criteria through a systematic comparison with other quantitative measures. The suitability of other metrics was limited as they only partially met the following criteria: Intuitive interpretation; Mathematical simplicity; Modest data requirements; Low sensitivity to small patches; Detection of structural differences; Mathematical homogeneity (i.e., intensive or extensive).
Indicator Specification Forest: growing stock, increment and fellings This indicator looks at the growing stock in forests and other wooded land. Growing stock is classified by forest type and by availability for wood supply. The indicator considers the balance between net annual increment and annual fellings of wood in forests to be made available for wood supply.
Indicator Specification
Archived
Abundance and distribution of selected species This indicator shows trends in the abundance of common birds and butterflies across their European ranges over time .  
Indicator Specification
Archived
Phenology of plant and animal species Trends in spring phenology
Indicator Specification
Archived
Distribution shifts of plant and animal species Trend in thermophilic species in bird and butterfly communities Projected change in climatically suitable areas for bumblebees
Indicator Specification
Archived
Habitats of European interest This indicator shows changes and trends in the conservation status of habitats of European interest listed in the Habitats Directive. It is based on data collected under the reporting obligations of Article 17 of the EU Habitats Directive (92/43/EEC). This reporting obligation contributes to the further development of EU and international biodiversity policy by providing a reliable measure of the status and trends in nature at both species and habitat levels.
Indicator Specification
Archived
Species of European interest This indicator shows changes and trends in the conservation status of species of European interest listed in the Habitats Directive, and in the status and trends in populations of wild birds in Europe that are listed in the Birds Directive. It is currently based on data collected under the obligations for monitoring under Article 17 of the EU Habitats Directive (92/43/EEC) and under Article 12 of the EU Birds Directive (2009/147/EC) . Both reporting obligations contribute to the further development of EU and international biodiversity policy by providing a reliable measure of the status and trends in nature at both species and habitat levels.
Indicator Specification
Archived
Public awareness This indicator is based on the Eurobarometer survey on biodiversity, a quantitative questionnaire-based survey, which provides results that can be presented as in the following fictional example: '35 % of the European voting population visit a nature reserve at least once a year'. It can also include qualitative information, often involving focus groups, as in the following fictional example: 'Discussion in the United Kingdom focus groups has shown that people are highly concerned about the impact of climate change on wildlife'.
Indicator Specification
Archived
Fragmentation of natural and semi-natural areas This indicator shows the proportion of and trends in natural and semi natural areas, on the basis of land cover maps produced by the photo-interpretation of satellite imagery.
Indicator Specification
Archived
Sites designated under the EU Habitats and Birds Directives This indicator shows the current status of implementation of the Habitats (92/43/EEC) and Birds Directives (79/409/EEC) by EU Member States. It does this by showing (a) trends in spatial coverage of proposals of sites and (b) by calculating a sufficiency index based on these proposals.
Indicator Specification Forest: deadwood This indicator shows the volume of standing and lying deadwood in forest and other wooded land, classified by forest type (Forest Europe - Ministerial Conference on the Protection of Forests in Europe (MCPFE)). In national forest inventories, countries generally classify according to type (standing, snags, lying, species and state of decay).
Indicator Specification Ecosystem coverage Proportional and absolute change in extent and turnover of land cover categories aggregated to relate to main ecosystem types in Europe from 2000 to 2006. The 12 ecosystem types discussed represent (1) urban, (2) cropland, (3) agricultural mosaics, (4) woodland and forest, (5) grassland and tall forb, (6) heathland, shrub and tundra, (7) transitional woodland, (8) sparsely vegetated land, (9) inland wetlands, (10) coastal, (11) rivers and lakes and (12) marine areas. This indicator is based on photo-interpretation of satellite imagery, and gives a 'wall to wall' picture of the changes and dynamics in Europe with respect to ecosystems. Additional indicators can be used to further highlight trends in extent and state of each of the ecosystem types mentioned above using computations from other data sources.
Indicator Specification
Archived
Agriculture: area under management practices potentially supporting biodiversity This indicator is based on two sub-indicators and shows trends in area (as proportion of the total utilised area) of two categories of agricultural land that are not mutually exclusive:  a. High nature value farmland area.  b. Area under organic farming.   a.'High nature value farmland area' (ha) indicates the area where farming systems are sustaining a high level of biodiversity. They are often characterised by extensive farming practices, associated with a high species and habitat diversity or the presence of species of European conservation concern. b.'Area under organic farming' (ha) indicates trends in the organic farming area and the share of the organic farming area in the total utilised agricultural area. Farming is only considered to be organic at the European Union (EU) level if it complies with Council Regulation (EC) No 834/2007, which provides a comprehensive framework for production of crops and livestock; labelling, processing and marketing of organic products; and the import of organic products into the EU.   Note: This indicator comprises two elements: a quality parameter (distribution of high nature value farmland) and a response parameter (area under agri-environment and organic farming). Both are relevant for an assessment of environmental sustainability although they are not necessarily linked.
Indicator Specification Abundance and distribution of selected species This indicator shows trends in the abundance of common birds and butterflies over time across their European ranges.  
Indicator Specification
Archived
Agriculture: nitrogen balance 'Gross nitrogen balance' estimates the potential surplus of nitrogen on agricultural land. This is done by calculating the balance between nitrogen added to an agricultural system (nitrogen input can be taken as a proxy indicator for the general intensity of agricultural management) and nitrogen removed from the system per hectare of agricultural land. The indicator accounts for all inputs to and outputs from the farm, and therefore includes nitrogen input.
Indicator Specification
Archived
Ecological footprint of European countries The ecological footprint for Europe is a measure of how much biologically productive land and water area Europe requires to produce all the biological resources it consumes and to absorb the waste it generates, using prevailing technology and management. This area could be located anywhere in the world. This can be compared with the biocapacity of the planet or that available within a given region. Both biocapacity and the ecological footprint are measured in global hectares.
Indicator Specification
Archived
Public awareness This indicator is based on a quantitative questionnaire-based survey (Eurobarometer survey on biodiversity) to provide results that can be presented as, for instance (fictional example): '35 % of the European voting population visit a nature reserve at least once a year'. It can include qualitative information, often involving focus groups, for instance (fictional example): 'Discussion in the United Kingdom focus groups has shown that people are highly concerned about the impact of climate change on wildlife'.
Indicator Specification Forest: growing stock, increment and fellings Growing stock in forest and other wooded land, classified by forest type and by availability for wood supply, and balance between net annual increment and annual fellings of wood on forest available for wood supply.

Permalinks

For references, please go to https://eea.europa.eu./policy-documents/eu-2020-biodiversity-strategy or scan the QR code.

PDF generated on 23 Nov 2024, 07:57 PM

EEA Page URL QR
Document Actions
The EEA is an agency of the European Union

Engineered by: EEA Web Team

Software updated on 26 September 2023 08:13 from version 23.8.18

Software version: EEA Plone KGS 23.9.14

Code for developers

Systems Status

Legal notice

Creative commons license

CMS login