Data

Copernicus Land Monitoring Service - High Resolution Layers - Imperviousness

Data

Prod-ID: DAT-14-en

Created 22 Nov 2017 Published 15 May 2018 Last modified 24 Jun 2022

3 min read

The imperviousness products capture the percentage and change of soil sealing. Sealed/Impervious areas are characterized by the substitution of the original (semi-) natural land cover or water surface with an artificial, often impervious cover. These artificial surfaces are usually maintained over long periods of time. The imperviousness HRL captures the spatial distribution of artificially sealed areas, including the level of sealing of the soil per area unit. The level of sealed soil (imperviousness degree 1-100%) is produced using a semi-automated classification, based on calibrated NDVI. Imperviousness data is available for the reference years 2006, 2009, 2012, 2015, and 2018, and contains two types of products: 1. Status layers Imperviousness Density (IMD) The percentage of sealed area is mapped for each status layer for any of the 5 reference years (e.g. degree of Imperviousness 2012). The status layers are available in 10m spatial resolution (2018), 20m spatial resolution (2006-2015), and as aggregated 100m products. Impervious Built-up (IBU) This product shows built-up areas, the part of the sealed surfaces where buildings can be found. Built-up areas are a sub-group of the sealed areas. It refers to areas where above-ground building constructions can be found. In contrast to the Imperviousness characterized by a continuous range of imperviousness measurements, built-up in the HRL 2018 is a binary product, expressed as built-up or non-built-up areas. This product is new for the 2018 mapping campaign and is available in 10 meter resolution, as well as a 100 meter aggregated version called Share of Built-up (SBU) 2. Change layers Two types of change products are available for each of the 3-year periods between the 5 reference years (2006-2009, 2009-2012, 2012-2015, 2015-2018), and in addition, for the period 2006-2012 (that is in line with the 6-year period between two Corine Land Cover products): a) A simple layer mapping the percentage of sealing increase or decrease for those pixels that show real sealing change in the period covered. This product is available in 20m and 100m pixel size. b) A classified change product that maps the most relevant categories of sealing change (unchanged no sealing, new cover, loss of cover, unchanged sealed, increased sealing, decreased sealing). This product is available in 20m pixel size only.

Data and maps

Menu

Up one level

All 2 items in this folder are selected. Clear selection
	Title	Size	Modified	State
Imperviousness status products	Imperviousness status products	1 KB	22 Nov 2017, 03:26 PM	Published
Imperviousness change products	Imperviousness change products	1 KB	22 Nov 2017, 03:28 PM	Published